Smoke and fire doors have been verified and tested by the European standards that confirm that the door can withstand the rigorous requirements of many everyday openings and closings and their endurance in such use. It has been confirmed that they are designed and manufactured at very high standards and that these are doors that can withstand long-term daily use.
All parts of the door are aligned with the EU standards and are certified. Quality control ensures that the hinges, locks, closing regulators and other parts that are optionally incorporated such as anti-panic handles, electronic locks, magnets and others meet the standards which ensure the reliability of the product.
The coating on the door is environmentally neutral, and homogenous surface is resistant to scratches and atmospheric conditions such as rain and sun.
Single-wing smoke doors
LVM – width of structural opening for doors
HVM - height of structural opening from the point of frame inc. threshold
Technical specifications of single-wing smoke doors EI2 120 with the EU norm UNI EN 1634-1
Door wings and frame are made of galvanized steel
Door frame type " Z " with three or four sides (depending on whether the door is reversible or fixed )
The door wing is filled with hard- pressed medium density rock wool
Finish: plastic coating in RAL 7035
Hardware according to the way of opening, with 2 hinges aligned for automatic closure
Steel lock and ‘ Cisa’ cylinder
Steel handle ‘Hoppe’, rounded, coated with PVC in black or alux color
Door wing 60 mm wide
Anti-smoke fitting tape in the inner door frame
The door is reversible and can be installed as left or right
The door can be equipped with electronic lock, which is an ideal preparation for the access control that can be performed by intercom, credit card or any other method required by the investor. The lock and access control can be unilateral or bilateral, depending on the need.
Falling threshold can also be installed, which goes down in the moment of closing the door fitting the gap between the door wing and the floor.
Doors are manufactured only in standard dimensions: LVM = 800-900-1000-1265-1350mm (width of structural opening) HVM = 2050mm (height of structural opening from the point of frame inc. threshold) Note: Fire doors over the width of structural openings LVM = 1100 made upon request