PVC is easily adaptable material produced by technology by which profiles for construction carpentry are successfully made.
PVC carpentry characteristics:
PVC doors and windows will last much longer without any need for large investments in maintenance. Confirmation of the material quality and durability, of which PVC doors and windows are made, is multi-year guarantee that is given by the manufacturer.
One of the best features of PVC windows and doors is their ability to provide sound and thermal insulation.
Thanks to the air chambers and fittings, windows have good thermal and sound insulation characteristics allowing for reduction of energy use for heating and cooling of the interior space, and therefore contribute to environmental protection.
Also, good characteristics of these profiles in combination with a two-layer or three-layer glass, which can be filled with argon, can contribute to a significant reduction of exterior noise.
Our PVC windows and doors provide light and ventilation in your homes, protecting the home from the noise, heat and cold. In the production of PVC doors and windows we take care of the smallest details.
PVC is the abbreviation of polyvinyl chloride, material that is widely used in producing doors and windows as a covering of galvanized steel. PVC doors and windows will last much longer without any need for large investments in maintenance. Confirmation of the material quality and durability, of which PVC doors and windows are made, is multi-year guarantee that is given by the manufacturer.
One of the best features of PVC doors and windows is their ability to sound and thermal insulation.
When you want to replace old doors and windows, the most important thing is to choose a good carpentry profile and door and window hardware, so those two things significantly affect the price of doors and windows.
There are a lot of quality PVC and aluminums profiles produced by German renowned manufacturer on the market, but the company BLOCK LOCK DOORS gives priority to INOUTIC (formerly Thyssen) doors and windows profiles. These PVC and Aluminium profiles have galvanized steel of 1.5mm in the frame and door side that gives extra strength and stability to the complete structure, because, certainly they are not made of recycled plastic, so during the installation of doors and windows, you will get guarantee. Years of experience and constant improvement and innovation are built into INOUTIC - THYSEN profiles.
There is a choice of two five- chambers profiles and six- chambers profiles. ELITE and ARCADE are five- chambers profiles with identical characteristics except one, in design: Arcade are with rounded sides and Elite are with straight edges. Six-chamber profile PRESTIGE is profile with one chamber more than ELITE and ARCADE, expanding to 5mm and contains third - middle rubber fittings.
PROFILES ELITE - ARCADE
PVC profiles ELITE and ARCADE are 71mm wide and with their extremely pleasing design, have excellent stability and offer excellent heat and sound insulation. Depending on the glass that can be used, it is possible to improve the sound and heat insulation. These PVC profiles are used for all structural openings: windows, entrance and balcony doors, shop windows, arched windows of doors and fixes, as well as slide solutions.
Five-chamber ELITE and ARCADE profiles- technical details:
PVC PROFILE - PRESTIGE
The PVC profile PRESTIGE provides high level of functionality, excellent sound and thermal insulation, completely meets the latest European standards of modern construction. With 76mm width, the middle- third rubber fitting, the PVC profile PRESTIGE will enable significant savings of energy. Compared with the windows with single glazing by old standards, it is achieved up to 40% savings in heating with PVC doors and windows produced by new EU standards. This quality PVC profile is best solution for the customers with special requirements because it offers the possibility of a three-layer NE glass filled with argon of 42mm width. This profile is also used for all structural openings.
Six-chamber PRESTIGE profile – technical details:
Among domestic manufacturers, we give advantage to the ROLOPLAST profiles. Six- and five-chamber PVC windows and doors made of Roloplast profiles are in several colors and designs and with the low-emission glasses provide optimum solutions for many years.
Doors and windows profiles made of PVC materials are durable and resistant to weather and UV radiation, have a air chamber system.
ROLOPLAST PVC profiles are characterized by a multi-chamber systems as follows:
Termopan glasses for PVC windows 4 +16 +4
Profiles can be laminated in the designs of golden oak, walnut, mahagony and gray color. The process of lamination involves putting the lamination foil on the surface of the profile, which not only contributes to better design of windows and doors, but also subsequently reduces the temperature.
In the standard package you get low emission ‘float’ glass .
In addition to the classic transparent insulation glass, we have a variety of thermal insulation, ornament, semi-reflex and reflex glass (matte, sand, stopsol...)
Characteristics of the six-chamber profile type ' 600 ' :
UV value of 1.16 W / m2 K
Sound insulation Rw = 36 dB
Water non-permeability tested to 8A ( EN 12208 : 2008)
Characteristics of the five-chamber profile type ‘500’:
UV value 1,12 W / m² К
Sound insulation Rw= 32 dB
Water non-permeability tested at 8А(SRPS EN 12208: 2008)
Catalogue of PVC panels for doors