Smoke and fire doors have been verified and tested by the European standards that confirm that the door can withstand the rigorous requirements of many everyday openings and closings and their endurance in such use. It has been confirmed that they are designed and manufactured at very high standards and that these are doors that can withstand long-term daily use.
All parts of the door are aligned with the EU standards and are certified. Quality control ensures that the hinges, locks, closing regulators and other parts that are optionally incorporated such as anti-panic handles, electronic locks, magnets and others meet the standards which ensure the reliability of the product.
The coating on the door is environmentally neutral, and homogenous surface is resistant to scratches and atmospheric conditions such as rain and sun.
Single-wing fire doors
LVM – width of structural opening for doors
HVM - height of structural opening from the point of frame inc. threshold
Technical specifications for single-wing fire doors E12 with the EU norm UNI EN 1634-1
Construction of box steel profiles, double- coated in steel sheet
Door frame type " Z " with three or four sides (depending on whether the door is reversible or fixed )
The door wing is filled with hard- pressed high density rock wool with a special insulation
Finish: plastic coating in RAL 7035
Hardware according to the way of opening, with 2 hinges aligned for automatic closure
Fire steel lock and ‘ Cisa’ cylinder
Anti-fire handle ‘Hoppe’, rounded, coated with PVC in black or alux color
Door wing 60 mm wide
Thermal expanding tape in a door frame
The door is reversible and can be installed as left or right
The doors have a certificate of fire issued by IMS Institute in Belgrade, SRPS U.J1.160, at 90 min of fire protection.
Table on the door wing which contains information on the certificate and the technical data for the door
The door can be equipped with electronic lock, which is an ideal preparation for the access control that can be performed by intercom, credit card or any other method required by the investor. The lock and access control can be unilateral or bilateral, depending on the need.
Optionally the door can be equipped with anti-panic handles, electronic locks or magnets which meet standards that ensure product reliability.
Falling threshold can also be installed, which goes down in the moment of closing the door fitting the gap between the door wing and the floor.
Doors are manufactured only in standard dimensions:
LVM = 800-900-1000-1100-1200-1265-1350mm (width of structural opening)
HVM = 2050-2150 mm (height of structural opening from the point of frame inc. threshold)
Note: Fire doors over the width of structural openings LVM = 1100 are made upon request